English
中文 / 汉语
Italiano
Português
Deutsch
Français
Русский
日本語
Türkçe
한국어
Español
Nederlands
ITT CANNON
121111-0134
CA3108E28-11P-B-01; CA Bayonet; Circular
View Datasheet Ask the Datasheet Accessories Notify Me
| Product Attribute | Attribute Value Select Attribute |
|---|---|
| Supplier: | ITT CANNON |
| Part No: | 121111-0134 |
| Alias/AKA: | CA3108E28-11P-B-01 |
| Unit of Measure: | Per Each |
| RoHS: | No |
| HTS: | 7616995190 |
Supplier's Standard Package: 
|
1 |
| Contact Type: | Metric Crimp |
| Salt Spray Resistance: | 500 hours salt spray resistant |
| Safety Provisions: | IP67 acc. to DIN 40 050 and IP68 (1 bar pressure for 16h) |
| Test Voltage: | 2000 Vrms |
| Shielding: | No |
| Harnessing Info: Contact Cross-Section: | See assembly instruction |
| Sep# Force Per Contact (Size 15/15s/16/16s): | 1,0 N |
| Air And Creepage Paths (Min): | 1,1 mm |
| Bayonet: | Connector with bayonet coupling |
| Contact Plating: | Hard silver |
| Mating Cycles: | 500 min |
| Sep# Force Per Contact (Size 25/12): | 1,5 N |
| Shell Style: | Plug, 90° |
| Contact Material: | Copper Alloy |
| Contact Rating At +20 °c (68 °f) (Size 25/12): | 41 A |
| General Info: | All tests in accordance with VG95319 and/or if applicable with VG95210 |
| Insulator Resistance: | Acc. To VG95319, part 2, test no. 5.12 and VG95210, part 32, test conditions B, standard insulator material > 1000 MΩ |
| Contact Rating At +20 °c (68 °f) (Size 15/15s/16/16s): | 22 A |
| Coupling Torque: | Closing: 17 Nm max / Opening: 0,92 Nm min |
| Contact Retention (Size 15/15s/16/16s): | 35 N |
| Endbell Style: | Endbell with clamp and bushing |
| Gender: | Pin |
| Wire Stripping (Size 25/12): | 6,2 mm |
| Insulator And Grommet Material: | CR-Elastomere |
| Contact Resistance (Size 15/15s/16/16s): | 6 mΩ |
| Contact Arrangement: | 28-11 |
| Operating Voltage: | In case of voltages greater than 50V the connector must be used in accordance with DIN VDE part 410, IEC 60364-4-41. |
| Harnessing Info: Insulator Diameter: | See assembly instruction |
| Shell Size: | 28 |
| Contact Retention (Size 25/12): | 55 N |
| Contact Resistance (Size 25/12): | 3 mΩ |
| Wire Stripping (Size 15/15s/16/16s): | 6,2 mm |
| Shell Plating: | Olive drab chromate over cadmium plating (conductive) |
| Wire Cross Section: | 2,0-3,0 mm² (Size 25), 0,75-1,5 mm² (Size 15) |
| Ambient Temperature: | Standard insulator material -55°/+125°C (-67/257°F) |
| Shell Material: | Aluminium alloy |
| Gauge: | For infos on Gauge please see catalog VG95234, part 1 |
| Number of Contacts: | 4 contacts size 25, 18 contacts size 15 |
-
EE ToolBox
Datasheet