ANG Sensors Übersicht
The ANG Series sensors are non-contact, intrinsically linear position sensors with one or two independent (redundant) outputs. The sensors operate through the use of Hall Effect Technologie with magnetic fields generated by permanent magnets. They provide a linear change in voltage output (ratiometric to the input voltage) corresponding to an angular rotation of the input shaft. Actuator magnet part number AS500106 is required to assure proper operation (ordered separately).

Merkmale

• Angular position sensor with high tolerance for misalignment
• Non-contact angular position sensing and full 360O rotation
• Custom programming available for: angle range, slope, PWM output – contact factory
• No mechanical interface means no parts to wear out or jam
• Comes with 20 AWG 305 mm (12”) discrete wire leads
• RoHS-konform
• IP68*
• Maximum air gap of 6 mm (0.24”)
• Compliant to Industrie/Automobil EMC/EMI/ESD directives

Typical Anwendungen

• Hydraulic valves
• Hydraulic controls
• Electric drives
• Pneumatic controls
• Zero-contact encoder alternative
• Gear selection / shifting position
• Lifting / ride height position
• Throttle / pedal position
• Steering wheel position

LIN Sensors (Kit with magnet) Übersicht
The LIN Series sensors are non-contact linear position sensors with one or two independent outputs. The sensors operate through the use of Hall Effect Technologie with magnetic fields generated by permanent magnets. They provide a linear change in voltage output (ratiometric to the input voltage) corresponding to a linear displacement of the actuator magnet. The included actuator magnet is specifically paired to the sensor and is required to assure proper operation. Other magnets may yield less than optimal performance.

Merkmale

• Easy setup and robust monitoring with M4 screws
• Dual independent (redundant) outputs assure high reliability
• No mechanical interface means no parts to wear out or jam
• Comes with 20 AWG 305 mm (12”) discrete wire leads or harness with connector
• RoHS-konform
• IP68*
• Compliant to Industrie/Automobil EMC/EMI/ESD directives

Typical Anwendungen

• Hydraulic valves
• Hydraulic controls
• Electric drives
• Pneumatic controls
• Zero-contact encoder alternative
• Gear selection / shifting position

GS1001 – GS1002 Sensors Übersicht

Hall Effect devices designed for use in Anwendungen where ferrous edge detection/near zero speed sensing is needed. They provide a sinking current output

Merkmale

• From near zero speed up to 15 kHz sensing capability
• 10 bit dynamic threshold direction offers:
• – Automatically adjusting magnetic range
• – Self-compensating to target geometry
• Compatible with unregulated power supply
• RoHS-konform
• IP67
• Typical air gap of 1.5 mm**

Typical Anwendungen

• Speedometers
• Anti-lock braking systems
• Exercise equipment
• CNC machine tools

* Contact our sales team for details on testing conditions

** With recommended target type; see drawing in datasheet