3212934

Plug-in bridge - pitch: 8.2 mm - width: 47.5 mm - number of positions: 6 - color: blue

Spacer plate - length: 22.4 mm - width: 8.2 mm - height: 29 mm - number of positions: 1 - ...

Plug-in bridge - pitch: 8.2 mm - width: 22.9 mm - number of positions: 3 - color: blue

End clamps - for supporting the ends of double-level and three-level terminal blocks - wid ...

Plug-in bridge - pitch: 8.2 mm - width: 22.9 mm - number of positions: 3 - color: gray

End clamp - width: 9.5 mm - height: 35.3 mm - material: PA - length: 50.5 mm - Mounting on ...

Plug-in bridge - pitch: 8.2 mm - width: 31.1 mm - number of positions: 4 - color: red

Plug-in bridge - pitch: 8.2 mm - width: 39.3 mm - number of positions: 5 - color: gray

Plug-in bridge - pitch: 8.2 mm - width: 47.5 mm - number of positions: 6 - color: gray

Phoenix Contact DIN Rail End Clamp; E/NS 35 N; for 35mm DIN Rail; Screw Terminal; Gray

Plug-in bridge - pitch: 8.2 mm - width: 80.3 mm - number of positions: 10 - color: blue

Plug-in bridge - pitch: 8.2 mm - width: 22.9 mm - number of positions: 3 - color: red

Plug-in bridge - pitch: 8.2 mm - width: 39.3 mm - number of positions: 5 - color: red

Plug-in bridge - pitch: 8.2 mm - width: 14.8 mm - number of positions: 2 - color: red

Plug-in bridge - pitch: 8.2 mm - width: 129.5 mm - number of positions: 16 - color: red

Quick mounting end clamp for NS 35/7,5 DIN rail or NS 35/15 DIN rail - with marking option ...

Plug-in bridge - pitch: 8.2 mm - width: 47.5 mm - number of positions: 6 - color: red

Plug-in bridge - pitch: 8.2 mm - width: 80.3 mm - number of positions: 10 - color: gray

Test adapter - for 4 mm test plug and terminal blocks with 8.2 mm pitch - color: blue

Plug-in bridge - pitch: 8.2 mm - width: 31.1 mm - number of positions: 4 - color: red

Short-circuit connector - pitch: 8.2 mm - width: 22.9 mm - number of positions: 3 - color: ...

Insulating Sleeve, MPS-IH WH Series | Phoenix Contact 0201663

Insulating sleeve - color: black

Insulating sleeve - color: gray

Insulating sleeve - color: blue

Insulating sleeve - color: yellow

DIN rail end piece - for DIN rail NS 35/15

Marker for terminal blocks - Card - white - unlabeled - can be labeled with: BLUEMARK ID C ...

Test adapter - for 4 mm test plug and terminal blocks with 8.2 mm pitch - color: green

Insulating sleeve - color: green

Connector Accessories DIN Rail Straight Steel White

Test adapter - for 4 mm test plug and terminal blocks with 8.2 mm pitch - color: gray

Test plugs - with solder connection up to 1 mm² conductor cross section - color: gray

Plug-in bridge - pitch: 8.2 mm - width: 14.7 mm - number of positions: 2 - color: red

Test adapter - for 4 mm test plug and terminal blocks with 8.2 mm pitch - color: brown

Plug-in bridge - pitch: 8.2 mm - width: 14.7 mm - number of positions: 2 - color: blue

Test adapter - for 4 mm test plug and terminal blocks with 8.2 mm pitch - color: black

Test adapter - for 4 mm test plug and terminal blocks with 8.2 mm pitch - color: red

Zack marker strip - Strip - white - unlabeled - can be labeled with: CMS-P1-PLOTTER - PLOT ...

Marker for terminal blocks - Sheet - white - unlabeled - can be labeled with: BLUEMARK ID ...

Terminal Block Tools & Accessories SB-MER 2-8

Switching jumper - pitch: 8.2 mm - length: 24.7 mm - width: 24.6 mm - number of positions: ...

Marker for terminal blocks - Sheet - white - unlabeled - can be labeled with: TOPMARK NEO ...

Zack marker strip - can be ordered: Strip - white - labeled according to customer specific ...

4 mm test adapter - for terminal blocks with 8.2 mm pitch

Multilingual software for terminal strip configuration. A marking module enables the profe ...

Zack Marker strip - flat - Strip - white - unlabeled - can be labeled with: PLOTMARK - CMS ...

Marker for terminal blocks - Sheet - white - unlabeled - can be labeled with: TOPMARK NEO ...

Switching jumper - pitch: 8.2 mm - length: 24.7 mm - width: 32.8 mm - number of positions: ...

Plug-in bridge - pitch: 8.2 mm - width: 14.7 mm - number of positions: 2 - color: gray

Test plugs - color: red

Operating decal for the push-in Technology

Zack marker strip, Strip, white, labeled, can be labeled with: CMS-P1-PLOTTER, Printed hor ...

Zack marker strip, Strip, white, labeled, can be labeled with: CMS-P1-PLOTTER, Printed ver ...

DIN Rail - 35mmx15mm - Unslotted - Steel 2m

DIN Rail - 35mmx15mm - Slotted - 2m

Connector Accessories Terminal Block Marker Straight Polyamide White

Plug-in bridge - pitch: 8.2 mm - width: 80.3 mm - number of positions: 10 - color: red

Plug-in bridge - pitch: 8.2 mm - width: 80.3 mm - number of positions: 10 - color: red

Plug-in bridge - pitch: 8.2 mm - width: 80.3 mm - number of positions: 10 - color: orange

The 3032583 is a 4-position, blue plug-in bridge with an 8.2 mm pitch for connecting termi ...

End cover - length: 90.5 mm - width: 2.2 mm - height: 36 mm - color: gray

Insulating sleeve - color: red

Test adapter - for 4 mm test plug and terminal blocks with 8.2 mm pitch - color: yellow

Test adapter - for 4 mm test plug and terminal blocks with 4.2 mm ... 8.2 mm pitch - color ...

Short-circuit connector - pitch: 8.2 mm - width: 14.7 mm - number of positions: 2 - color: ...

Plug-in bridge - pitch: 8.2 mm - width: 39.3 mm - number of positions: 5 - color: blue

Short-circuit connector - pitch: 8.2 mm - width: 31.1 mm - number of positions: 4 - color: ...

Zack Marker strip - flat - can be ordered: Strip - white - labeled according to customer s ...

Marker for terminal blocks - can be ordered: by sheet - white - labeled according to custo ...

Marker for terminal blocks - can be ordered: by sheet - white - labeled according to custo ...

DIN Rail - 35mmx15mm - Slotted - 2m

The 1201714 is an unperforated, standard profile DIN rail made of galvanized steel, measur ...

DIN Rail - 35mmx15mm - Unslotted - Aluminum - 2m